temperatures
Doug Fenner
d.fenner at aims.gov.au
Tue Nov 17 22:30:00 EST 1998
Concerning dive computer temperatures:
Another distinct possibility comes from the low absolute accuracy of
these temperature sensors. The manual for my dive computer says it is only
accurate to about 2 deg. The pressure sensor for the computer is
temperature compensated- I suspect that is why the computer has a
temperature sensor, and since they have it, why not give the temp to the
diver? But the accuracy needed for compensating the pressure sensor is
low, so it isn't worth a lot of money & effort for the manufacturer to put
a more accurate one in.
I suspect that the computer and your watch probably read different temps
when they are at the same temp. However, each one is probably consistent-
high repeat accuracy- so if calibrated they might be quite good. Haven't
gotten around to doing that with my own. Their accuracy is limited though,
since they read only in whole degrees- the actual temp could be anywhere
within a 1 degree range, even if it was calibrated accurately. Because of
the size of the computer, it also takes quite a while to equilibrate to
ambient temp. -Doug
Douglas Fenner, Ph.D.
Coral Taxonomist
Australian Institute of Marine Science
PMB No 3
Townsville MC
Queensland 4810
Australia
phone 07 4753 4241
e-mail: d.fenner at aims.gov.au
web: http://www.aims.gov.au
More information about the Coral-list-old
mailing list